All products

SIEMENS: SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 1.20 M

SIEMENS: SINAMICS S120 ACTIVE INTERFACE MODULE FOR 55KW ACTIVE LINE MODULE INPUT: 3AC 380-480V, 50/60HZ

SIEMENS: SINAMICS S110 CONTROL UNIT CU305 PN WITH PROFINET INTERFACE WITHOUT MEMORY CARD

SIEMENS: SINAMICS S210 AC- and DC-Link Connector-Kit for 3AC 400V Frame Size: FSA - FSC

SIEMENS: SINAMICS Output reactor FOR POWERMODULE FSC 3AC 380V-480V 39 A

***NON-RETURNABLE***

SIEMENS: SINAMICS reactor 380-480V 3AC 47-63Hz I_LN=11.3 A Stand-alone

SIEMENS: SINAMICS POWER MODULE PM240-2 WITH BUILT IN CL. A FILTER WITH BUILT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 5,5KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT LOW OVERLOAD: 7,5KW FOR 150% 3S,110% 57S,100% 240S AMBIENT TEMP -10 TO +40 DEG C 291 X 100 X 165 (HXWXD), FSB PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU FIRMWARE- VERSION V4.6

***NON-RETURNABLE***

SIEMENS: SINAMICS S120 Communication Board Robox EtherCAT Option module for CU320-2

***NON-RETURNABLE***

SIEMENS: SINAMICS 24 V TERMINAL ADAPTER FOR MODULES IN BOOKSIZE DESIGN

SINAMICS reactor 380-480V 3AC 47-63Hz I_LN=47.0 A Stand-alone

SIEMENS: SINAMICS S120 SMART LINE MODULE INPUT: 3AC 380-480V, 50/60HZ OUTPUT: 600VDC, 17A, 10KW FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING INCL. CONTROL VOLTAGE ADAPTER MODULES PAINTED

SIEMENS: SINAMICS Power Module PM240-2 unfiltered with integrated braking chopper 380-480 V 3 AC +10/-10% 47-63 Hz Power high overload: 0.55kW at 200% 3s, 150% 57s, 100% 240 s; Ambient temperature -10 to +50 °C; power low overload: 0.75kW at 150% 3s, 110% 57s, 100% 240 s; Ambient temperature -10 to +40 °C 196x 73x 165 (HxWxD), FSA Degree of protection IP20 without Control Unit and operating unit Released as of CU firmware version V4.6

SIEMENS: SINAMICS Power Module PM240-2 unfiltered with integrated braking chopper 380-480 V 3 AC +10/-10% 47-63 Hz Power high overload: 2.2kW at 200% 3s, 150% 57s, 100% 240 s; Ambient temperature -10 to +50 °C; power low overload: 3kW at 150% 3s, 110% 57s, 100% 240 s; Ambient temperature -10 to +40 °C 196x 73x 165 (HxWxD), FSA Degree of protection IP20 without Control Unit and operating unit Released as of CU firmware version V4.6

SIEMENS: Power cable pre-assembled TYPE 6FX5002-5CN06 4X1,5 C, SPEED-CONNECT SIZE 1 FOR SINAMICS S120 BOOKSIZE MOTOR MODULE C-/D-TYPES MOTION-CONNECT 500 UL/CSA, DESINA DMAX=8.4 MM LENGTH (M) = +0 +40 +4 +0

***NON-RETURNABLE***

ABSOLUTE ENCODER SINGLETURN 6FX2001-5WD13 24 BIT WITH DRIVE-CLIQ; HOLLOW SHAFT 12MM

SIEMENS - SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.16 M

SIEMENS: SINAMICS S210 SD card 8 GB incl. licensing (Certificate of License, stored on the card), V6.1

SIEMENS: SIPLUS G120 IOP-2 based on 6SL3255-0AA00-4JA2 with conformal coating, -20?+50 ?C, for SIPLUS SINAMICS G120 supported languages: German, English, French Italian, Spanish Portuguese, Dutch Swedish, Russian Czech, Polish Turkish, Finnish Chinese simplified

SIEMENS: SIMATIC MICRO-DRIVE PDC600, drive controller for servo drives in the extra low voltage range, 24 up to 48 V CS power supply of the operating mechanism, motor output max. 600 W, with hardwired STO

SIEMENS: SIMATIC MICRO-DRIVE SBS1-50, PDC shield bracket set with bracket length 50 mm 1 terminal clamp 20 mm, 2 terminal clamps 12 mm, 1 grounding strap

***NON RETURNABLE***

SIEMENS: SIMATIC MICRO-DRIVE SBS1-90, PDC shield bracket set with bracket length 90 mm 2 terminal clamps 20 mm, 3 terminal clamps 12 mm, 1 grounding strap

SIEMENS: SINAMICS S120 basic line module Input: 380-480V 3AC, 50/60 Hz Output: 510-650 V DC, 740A Rated power: 360kW Built-in unit IP00 Liquid cooling

SIEMENS: SIMATIC S7-1500, Drive Controller CPU 1504D TF With SINAMICS S120 Integrated; Interfaces: 12 DI, 16 DI/DQ, 4 DRIVE-CLiQ, 3 PROFINET: 3+1+1 ports, 1 PROFIBUS, SIMATIC memory card required

SIEMENS: Power cable pre-assembled TYPE 6FX5002-5CN06 4X1,5 C, SPEED-CONNECT SIZE 1 FOR SINAMICS S120 BOOKSIZE MOTOR MODULE C-/D-TYPES MOTION-CONNECT 500 UL/CSA, DESINA DMAX=8.4 MM LENGTH (M) = +0 +50 +0 +0

***NON RETURNABLE***

SIEMENS: SINAMICS S120 SMART LINE MODULE INPUT: 3AC 380-480V, 50/60HZ OUTPUT: 600VDC, 8.3A, 5KW FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING INCL. CONTROL VOLTAGE ADAPTER MODULES PAINTED

SIEMENS: SINAMICS LINE REACTOR FOR 5 KW SMART LINE MODULE INPUT: 3-PH 380-480 V, 50/60 HZ

SIEMENS: SINAMICS g120 power module pm24 built in cl. a filter with buil braking chopper 3AC380-480v +10 47-63HZ output high overload 2, 200% 3s,150% 57s,100% 240s ambi -10 to +50 deg c output low ove for 150% 3s,110% 57s,100% 240s temp -10 to +40 deg c 196 x 73 (hxwxd), fsa protection IP20 wi control unit and panel approved firmware- version v4.6

***NON-RETURNABLE***

SIEMENS - ABSOLUTE ENCODER SINGLETURN 6FX2001-5FD13 24 BIT WITH DRIVE-CLIQ; CONNECTOR M12 SYNCHR. FLANGE; SHAFT 6MM

SIEMENS: ABSOLUTE ENCODER SINGLETURN 6FX2001-5QD13 24 BIT WITH DRIVE-CLIQ; CLAMP FLANGE; SHAFT 10MM

***NON-RETURNABLE***

SIEMENS: absolute encoder 6FX2001-5WN13 single-turn 16-bit with PROFINET operating voltage 10-30 V hollow shaft/8/10/12/15 mm plug M12 radial FS15 maximum ambient temperature 85 °C

SIEMENS: Signal cable pre-assembled type: 6FX2002-1DC00 (SINAMICS Drive CLiQ) Connector IP20/IP20, without 24 V Length (m)= 0 + 0 + 2 + 0

***NON-RETURNABLE***

SIEMENS: Signal cable pre-assembled type: 6FX2002-1DC00 (SINAMICS Drive CLiQ) Connector IP20/IP20, without 24 V Length (m)= 0 + 0 + 4 + 0

***NON RETURNABLE***

SIEMENS: Signal cable pre-assembled type: 6FX2002-1DC00 (SINAMICS Drive CLiQ) Connector IP20/IP20, without 24 V Length (m)= 0 + 0 + 7 + 0

***NON RETURNABLE***

SIEMENS: Encoder cable, Preassembled 3x2x0.25 for motor S-1FL2 SH45/65/90 with S200, MOTION-CONNECT 350 Length(m)=5m Dmax encoder=7.0mm 1 million bending times

***NON-RETURNABLE***

SIEMENS: Encoder cable, Preassembled 3x2x0.25 for motor S-1FL2 SH45/65/90 with S200, MOTION-CONNECT 350 Length(m)=7m Dmax encoder=7.0mm 1 million bending times

***NON-RETURNABLE***

SIEMENS: Power cable, Preassembled 4x0.75 for motor S-1FL2 SH45/65/90 with S200, MOTION-CONNECT 350 Length(m)=5m Dmax power=7.5mm w.o. brake 1 million bending times

***NON-RETURNABLE***

SIEMENS: Power cable, Preassembled 4x2.5 for motor S-1FL2 SH45/65/90 with S200, MOTION-CONNECT 350 Length(m)=7m Dmax power=9mm w.o. brake 1 million bending times

***NON-RETURNABLE***

SIEMENS: Dual cable pre-assembled 4x0.75/3x2x0.25 for motor S-1FL2 SH20/30/40 with S200, MOTION-CONNECT 350 Length(m)=5m Dmax power=7.5mm Dmax encoder=7.0mm w.o. brake, Drive End Outlet 1 million bending times

***NON-RETURNABLE***

SIEMENS: Encoder cable, Preassembled 3x2x0.25 for motor S-1FL2 SH45/65/90 with S200, MOTION-CONNECT 380 Length(m)=7m Dmax encoder=7.0mm 5 million bending times

***NON-RETURNABLE***

SIEMENS: Power cable, Preassembled 4x1.5 for motor S-1FL2 SH45/65/90 with S200, MOTION-CONNECT 380 Length(m)=7m Dmax power=7.8mm w.o. brake 5 million bending times

***NON-RETURNABLE***

SIEMENS - Signal cable pre-assembled (HTL in motor 1-ph.) 4x 2x 0.34+4x 0.5 C UL/CSA, DESINA MOTION-CONNECT 500 Dmax=9.3 mm TYPE: 6FX5002-2AH00 LENGTH (M) = 0 + 10 + 0 + 0 SIGNAL CABLE, PREFABRICATED (HTL IN THE MOTOR 1PH.) 4X2X0.38 + 4X0.5 C UL/CSA, DESINA MOTION-CONNECT 500 DMAX = 9.3 MM

SIEMENS: Single cable extension 4G0.75+2x0.5+4x0.2 C Socket and plug Speed-Connect M17 female / M17 male UL/CSA DESINA MOTION-CONNECT 500 Dmax= 10.5 mm, length (m)= 0 + 20 + 0 + 0

SIEMENS: Single cable connection prefabricated 4G0.75+2x0.5+4x0.2 C SPEED-CONNECT connector M17 Cores with end sleeve Data cable with IX connector UL/CSA DESINA MOTION-CONNECT 500 Dmax=10.5 mm, length(m)= 0 + 10 + 5 + 0

SIEMENS: signal cable, pre-assembled Extension (611D/MCU to encoder EnDat) 3x 2x 0.14+4x 0.14+2x0.5 C UL/CSA, DESINA MOTION-CONNECT 500 Dmax=9.3 mm TYPE: 6FX5002-2AD04 LENGTH (M) = +0 +0 +1 +0

***NON-RETURNABLE***

SIEMENS: signal cable pre-assembled (encoder voltage signal) 3x 2x 0.14+4x 0.14+2x0.5+4x 0.23 C UL/CSA, DESINA MOTION-CONNECT 500 Dmax=9.9 mm TYPE: 6FX5002-2CA31 LENGTH (M) = 0 + 20 + 9 + 0

SIEMENS: Signal cable pre-assembled type: 6FX5002-2DC10 (SINAMICS DRIVE-CLiQ) plug IP20/IP67, with 24 V MOTION-CONNECT 500 length (m)= +0 +0 +3 +0 SIGNAL CABLE, PREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-CONNECT 500 LENGTH (M) =

SIEMENS: Signal cable pre-assembled type: 6FX5002-2DC10 (SINAMICS DRIVE-CLiQ) plug IP20/IP67, with 24 V MOTION-CONNECT 500 length (m)= +0 +0 +5 +0 SIGNAL CABLE, PREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-CONNECT 500 LENGTH (M) =

SIEMENS - Signal cable pre-assembled type: 6FX5002-2DC10 (SINAMICS DRIVE-CLiQ) plug IP20/IP67, with 24 V MOTION-CONNECT 500 length (m)= 0 + 30 + 0 + 0 SIGNAL CABLE, PREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-CONNECT 500 LENGTH (M) =

SIEMENS: Signal cable pre-assembled type: 6FX5002-2DC10 (SINAMICS DRIVE-CLiQ) plug IP20/IP67, with 24 V MOTION-CONNECT 500 length (m)= +0 +50 +0 +0 SIGNAL CABLE, PREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-CONNECT 500 LENGTH (M) =

SIEMENS: Signal cable pre-assembled type: 6FX5002-2DC10 (SINAMICS DRIVE-CLiQ) plug IP20/IP67, with 24 V MOTION-CONNECT 500 length (m)= +0 +80 +0 +0 SIGNAL CABLE, PREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-CONNECT 500 LENGTH (M) =

***NON-RETURNABLE***