All products

TSLOTS: M8 x 16 mm BHSCS

TSLOTS: Threaded rod for ECO feet, M12 x 50 zinc plated steel

TSLOTS: M8 x 20 mm BHSCS

TSLOTS: M8 Hex Nut

WAGO: 4-conductor through terminal block; 1.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,50 mm²; gray

WAGO: 4-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; red

WAGO: 4-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; black

WAGO: 4-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; yellow

WAGO: 4-conductor ground terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; green-yellow

WAGO: LEVER-NUTS® splicing connector; 3-conductor with operating levers; 24-12 AWG; transparent housing; ***Bag of 2,500 pieces***

SIEMENS: Control Power Transformer, 50va, PRI 240x480v, SEC 120x240v, Domestic,

WAGO: 2-conductor through terminal block; 95 mm²; lateral marker slots; only for DIN 35 x 15 rail; POWER CAGE CLAMP; 95,00 mm²; gray

WAGO: Relay module; Nominal input voltage: 24 VDC; 1 changeover contact; Limiting continuous current: 6 A; with gold contacts; Yellow status indicator; Module width: 6 mm; 2,50 mm²; gray

WAGO: 4-conductor shield terminal block; 2.5 mm²; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; white

WAGO: 4-conductor through terminal block; 6 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 6,00 mm²; blue

WAGO: Distribution terminal block, with operating slots 1 x 6 mm² / 6 x 1.5 mm², gray

WAGO: "LEVER-NUTS® splicing connector; 3-conductor with operating levers; 24-12 AWG; transparent housing; Jar of 350 pieces"

WAGO: Relay module; Nominal input voltage: 24 V AC/DC; 1 changeover contact; Limiting continuous current: 6 A; with gold contacts; Yellow status indicator; Module width: 6 mm

WAGO: Isolation amplifier; Current and voltage input signal; Supply voltage: 24 VDC; 6 mm module width

WAGO: Visual Panel 204 4.3" (11 cm); 800 x 480 pixels; 600 cd/m2 brightness, Ethernet, USB, RS-232/485, IP65 (front); NEMA 4x, 12 (Front)

SIEMENS: CONTROL TRANSFORMER,1KVA,208/27 CONTROL TRANSFORMER,1KVA,208/27

SIEMENS: Industrial Ethernet FastConnect blade cassettes, spare blade cassettes for the IE FastConnect stripping tool 1 pack=5 units, 5 mm; Insert for FC RJ45 plug and modular outlet.

SIEMENS: SITOP modular 40 A stabilized power supply input: 400-500 V 3 AC output: 24 V DC/40 A

SIEMENS: SCALANCE XB108-2 unmanaged IE switch, 8x 10/100 Mbit/s Ports, 2x 100 Mbit/s multimode BFOC, for setting up small star and line topologies, LED diagnostics, IP20, redundant power supply 24 V AC/DC Manual available as a download.

SIEMENES: *** Spare part *** SIMATIC DP, Electronics module for ET 200S, 1 STEP 5 V/204 kHz for stepper motor positioning 15 mm wide, 1-channel +/-5 V interface to power unit

SIEMENS: power contactor, AC-3e/AC-3, 9 A, 4 kW / 400 V, 3-pole, 110 V AC, 50 Hz / 120 V, 60 Hz, auxiliary contacts: 1 NO + 1 NC, screw terminal, size: S0

SIEMENS: AS-i Power 3A 120 V/230 V AC AS-Interface power supply unit, IP20 IN: 120 V / 230 V AC OUT: AS-i, 3 A (30 V DC), IP20 with integrated ground fault detection, with integrated overload detection with AS-i data decoupling

SIEMENS: SIMATIC STEP 7 Professional V21/2021 SR4 Combo including TIA Portal; floating license for 1 user; engineering software; software, documentation and license key as download; class A; 5/9 languages (de,en,fr,es,it)/(zh,ru,ja,ko); executable in Windows Server 2019/2022/2025, Windows 10/11 Professional, Windows 10/11 Enterprise; reference hardware: S7-300/400 (S7-1200/1500) - - consignee email address required for delivery
***DOWNLOADABLE ONLY***
***NON-RETURNABLE***

SIEMENS: SIMATIC IPC277E (Nanopanel PC); 15" Touch TFT; 2x 10/100/1000 Mbps Ethernet RJ45; 1x display port graphic; 1x USB 3.0; 3x USB 2.0; 1x serial (COM 1); CFast slot; 24 V DC power supply; 1x front-USB Celeron N2930 (4C/4T) 4 GB with NVRAM WIN Embedded Standard 7E SP1, English; 32 bit 8 GB CFAST; without SIMATIC software
***NON-CANCELLABLE***
***NON-RETURNABLE***

SIEMENS: Illuminable selector switch, 22 mm, round, plastic, black, Selector switch short, 3 switch positions I-O-II, latching, actuating angle 2x45°, 10:30h/12h/13:30h

SIEMENS: contactor, NEMA version, 5 HP, 460 / 575 V, 3-pole, 110 V AC, 50 Hz / 120 V, 60 Hz, auxiliary contacts: 1 NO, screw terminal, size: S00

RITTAL: AC 2695BTU 230V 50-60HZ TYPE12 STEEL ROOFMTG, COMFORT CONTR, RAL7035, NANOCOATED CONDENSER, CONDE

RITTAL: AC 2115BTU 230V 50-60HZ TYPE12 STEEL ROOFMTG, COMFORT CONTR, RAL7035, NANOCOATED CONDENSER, CONDE

SIEMENS: Course ID: US-PTBADIA-20260227
Course Name: Introduction to TIA Portal and Diagnostics - Virtual
Dates: July 27 - 31, 2026
Location: Virtual Instructor-led Learning

TSLOTS: Double ball catch, PA

SIEMENS: Power cable pre-assembled TYPE 6FX5002-5CN06 4X1,5 C, SPEED-CONNECT SIZE 1 FOR SINAMICS S120 BOOKSIZE MOTOR MODULE C-/D-TYPES MOTION-CONNECT 500 UL/CSA, DESINA DMAX=8.4 MM LENGTH (M) = +0 +40 +4 +0

***NON-RETURNABLE***

TSLOTS: 1/4-20 x 5/8" BHSCS

SIEMENS: SWBD 1--SB3 SWITCHBOARD - 2 SECTIONS
SB3, Material group 3: VD7, Incoming Location: Bottom, Incoming Position: Left,
Service Entrance: Yes, System: 480Y/277 3Ø4W WYE AC, 100,000 A, Bus Bracing:
100,000 A, Bus Material: 65°C Copper, Bus Rating: Non-Tapered, Incoming Bus
Amperage: 4,000 A, Enclosure Rating: 1 - Indoor (Standard).
SWBD 2--SB2 SWITCHBOARD - 2 SECTIONS
SB2, Material group 3: VD5, Incoming Location: Bottom, Incoming Position: Left,
Service Entrance: Yes, System: 480Y/277 3Ø4W WYE AC, 100,000 A, Bus Bracing:
100,000 A, Bus Material: 65°C Copper, Bus Rating: Non-Tapered, Incoming Bus
Amperage: 4,000 A, Enclosure Rating: 1 - Indoor (Standard).

SIEMENS: SIMATIC S7-400, Backup battery 3.6 V/2.3 AH for PS 405 4 A/10 A/20 A and PS 407 4 A/10 A/20 A for extended temperature range

SIEMENS: Enclosure for command devices, 22 mm, round, Enclosure material plastic, Enclosure top part yellow, 1 control point plastic, with protective collar, A=EMERGENCY STOP mushroom pushbutton red, 40 mm, rotate-to-unlatch, 1 NC, screw terminal, floor mounting, 1xM20 each on top and bottom

SIEMENS: SIMATIC S7-1200, analog I/O SM 1234, 4 AI/2 AO, +/-10 V, 14-bit resolution or 0 (4)-20mA, 13-bit resolution

TSLOTS: Self-Aligning Roll-in T-Slot Nut 11,6 x 4,6 mm, M6, with spring leaf, steel

RITTAL: WM161208NC WM 16X12X08 CARBON STEEL 7035

SIEMENS: SIMATIC PM 1507 24 V/3 A Stabilized power supply for SIMATIC S7-1500 input: 120/230 V AC, output: 24 V DC/3 A

WAGO: WMB-INLINE or Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; white

WAGO: 4-conductor through terminal block; with push-button; 2.5 mm²; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray

SIEMENS: Contact module with 1 contact element, 1 NC, screw-type terminal, for floor mounting,
***Minimum order quantity 5 or a multiple thereof***

SIEMENS: SIMATIC S7, safety programming tool, STEP 7 Safety Advanced, software update service download within the framework of this contract, you will receive for one year all up-to-date software versions. The contract is extended automatically by 1 year if not canceled 3 months prior to expiration. period of delivery and service: 1 year from date of invoice. requirement for conclusion: current version of the software - - consignee email address required for delivery

***DOWNLOADABLE ONLY***
***NON-RETURNABLE***

SIEMENS: SIMATIC S7-1200, CPU 1214C, COMPACT CPU, AC/DC/RLY, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A; 2 AI 0 - 10V DC, POWER SUPPLY: AC 85 - 264 V AC AT 47 - 63 HZ, PROGRAM/DATA MEMORY: 100 KB NOTE: !!V14 SP2 PORTAL SOFTWARE IS REQUIRED TO PROGRAM!!

SIEMENS: AS-Interface Addressing unit V3.0 for setting the addresses of AS-i slave modules Input/output test and further functions AS-i specification V3.0 M12 connection socket with addressing cable 1.5 m (M12 connector/hollow plug) with batteries (4 x 1.5 V LR6)