All products

SIEMENS: SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO 24V DC 0.5A 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 125 KB NOTE: !!V13 SP1 PORTAL SOFTWARE IS REQUIRED TO PROGRAM!!

SIEMENS: SIRIUS soft starter 200-600 V 315 A, 110-250 V AC Screw terminals Analog output

SIEMENS: ***spare part*** SIMATIC S7-300, analog input SM 331, isolated, 8 AI, resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole removing/inserting with active backplane bus

51 mm (2 inch) AISI Grounding Ring

SIEMENS: SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit (55ms), Single rooting (50 V COM.), 1x 40-pole

SIEMENS: ***spare part*** SIMATIC S7-300, digital output SM 322, isolated 16 DO, relay contacts, 1x 20-pole

SIMATIC S7-1500, system power supply PS 60W 120/230V AC/DC, supplies the backplane bus of S7-1500 with operating voltage

SIEMENS: SIMATIC S7-400, Backup battery 3.6 V/2.3 AH for PS 405 4 A/10 A/20 A and PS 407 4 A/10 A/20 A

SIEMENS: Circuit breaker size S00 for transformer protection A-release 10...16 A N-release 286 A Spring-type terminal Standard switching capacity

SIEMENS: SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit, Single rooting (60 V COM.), 4-channel operation: 10 ms, 8-channel operation: 23-95ms, 1x 40-pole

SIEMENS - SIMATIC S7-300, CP 341 Communications processor with RS422/485 interface incl. configuration package on CD

SIEMENS - SIMATIC S7-1200, CPU 1215C, COMPACT CPU, AC/DC/RELAY, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A, 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: AC 85 - 264 V AC AT 47 - 63 HZ, PROGRAM/DATA MEMORY: 125 KB NOTE: !!V13 SP1 PORTAL SOFTWARE IS REQUIRED TO PROGRAM!!

SIEMENS: SIMATIC S7-300, dummy module DM 370, Dummy module Use for module replacement

SIEMENS: SIMATIC S7-300, Front connector for signal modules with screw contacts, 20-pole

SIEMENS: SINAMICS reactor 380-480V 3AC 47-63Hz I_LN=11.3 A Stand-alone

15 S Stepped Drop In T-Nut w/ Ball Bearing 1/4-20

SIEMENS: SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/RELAY, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A, 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 125 KB NOTE: !!V13 SP1 PORTAL SOFTWARE IS REQUIRED TO PROGRAM!!

TSLOTS: 45S 45x45mm End Cap Black

SIEMENS: SIMATIC S7-1200, Digital input SM 1221, 16 DI, 24 V DC, Sink/Source

TSLOTS: Hammer nut, M5, height 1.5 mm,

SIEMENS: SIMATIC S7-1200, Digital output SM 1222, 8 DO, 24 V DC, transistor 0.5 A

SIEMENS: SIMATIC S7-1200, Digital output SM 1222, 8 DO, relay 2 A

SIEMENS: ***spare part*** SIMATIC S7-300, front connector with screw connections, 40-pole

SIEMENS: SIMATIC S7-400, rack UR1 Alu, central and distributed with 18 slots, 2 redundant PS can be plugged in

SIEMENS - SIMATIC S7-400H, rack UR2-H, central and distributed with 2 x 9 slots

TSLOTS: TS40-40 LM (PRICED PER INCH)

SIEMENS: SINAMICS POWER MODULE PM240-2 WITH BUILT IN CL. A FILTER WITH BUILT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 5,5KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT LOW OVERLOAD: 7,5KW FOR 150% 3S,110% 57S,100% 240S AMBIENT TEMP -10 TO +40 DEG C 291 X 100 X 165 (HXWXD), FSB PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU FIRMWARE- VERSION V4.6

***NON-RETURNABLE***

SIEMENS: SIMATIC S7-1200, Digital I/O SM 1223, 8 DI/8 DO, 8 DI 24 V DC, Sink/Source, 8 DO, transistor 0.5 A

SIEMENS: SIMATIC S7-1200, Digital I/O SM 1223, 16 DI/16 DO, 16 DI 24 V DC, Sink/Source, 16 DO, transistor 0.5 A

SIEMENS: SIMATIC S7-1200, Digital I/O SM 1223, 8 DI/8 DO, 8 DI 24 V DC, Sink/Source, 8 DO, relay 2 A

SIEMENS: SIMATIC S7-1200, Digital I/O SM 1223, 16 DI/16 DO, 16 DI 24 V DC, Sink/Source, 16 DO, relay 2 A

SIEMENS - SIMATIC S7-1200, Digital I/O SM 1223, 8 DI AC/8 DO RLY, 8 DI 120/230 V AC, 8 DO relay 2 A

SIEMENS: SIMATIC S7-400, Power supply PS407; 10 A, wide range, UC 120/230V, 5 V DC/10 A, for redundant use

SIRIUS soft starter S0 32 A, 15 kW/400 V, 40 °C 200-480 V AC, 24 V AC/DC Screw terminals

SIEMENS: SIRIUS soft starter 200-600 V 143 A, 110-250 V AC Screw terminals Analog output

SIEMENS: SINAMICS S120 Communication Board Robox EtherCAT Option module for CU320-2

***NON-RETURNABLE***

SIEMENS: SIMATIC S7-400, interface module IF963-X27 with RS422/RS485 interface for PTP coupling with CP441 AB CP 441- AA05

SIEMENS: SINAMICS 24 V TERMINAL ADAPTER FOR MODULES IN BOOKSIZE DESIGN

SIEMENS: Circuit breaker size S3 for motor protection, CLASS 10 A-release 57...75 A N-release 975 A screw terminal Standard switching capacity

SIEMENS: SIMATIC S7-1200, Analog input, SB 1231, 1 AI, +/-10 V DC (12 bit resol.) or 0-20 mA

SIEMENS: continuous light element, yellow, 12-230 V AC/DC, 70 mm diameter, base BA15d without light element

SIEMENS - SIMATIC S7-1200, Analog input, SM 1231, 4 AI, +/-10 V, +/-5 V, +/-2.5 V, or 0-20 mA/4-20 mA, 12 bit+sign (13 bit ADC)

SIEMENS: SIMATIC S7-1200, Analog input, SM 1231, 8 AI, +/-10 V, +/-5 V, +/-2.5 V, or 0-20 mA/4-20 mA, 12 bit+sign or (13 bit ADC)

SIEMENS: Connection element, with end cover, black, for pipe mounting, with screw terminal,

SIEMENS: Connection element, with end cover, black, for pipe mounting, with screw terminal,

SIEMENS: SCALANCE XB213-3 managed Layer 2 IE switch 13x 10/100 Mbit/s RJ45 ports, 3x MM FO ST port 1x console port, diagnostics LED, redundant power supply, IEC 62443-4-2 certified; temperature range 0 °C to +60 °C; DIN-rail mounting; default PROFINET.

SIEMENS: SIMATIC S7-1200, Analog input, SM 1231 RTD, 4xAI RTD module

SIEMENS: Connection element, with end cover, black, for floor/angle mounting, with screw terminal,

TS30-30 L (PRICED PER INCH)

TSLOTS: TS10-20 Black