All products

SIEMENS: Wiring kit spring-type Electrical and mechanical Including mechanical interlocking for reversing starter Size S00

SIEMENS: link module for screw terminal electrical and mechanical for 3RV2.1/3RV2.2-3RT2.2 DC operation,AC/DC operation or soft starter 3RW3 or solid-state contactor 3RF34

SIEMENS: MOUNTING RAIL, SIMATIC S7-1500, 200MM

SIEMENS:
Overload relay 0.32...1.25 A Electronic For motor protection Size S00, Class 10E Contactor mounting Main circuit: Screw Auxiliary circuit: Screw Manual-Automatic-Reset

SIEMENS: Overload relay 3...12 A Electronic For motor protection Size S00, Class 10E Contactor mounting Main circuit: Screw Auxiliary circuit: Screw Manual-Automatic-Reset

SIEMENS - Overload relay 4...16 A Electronic For motor protection Size S00, Class 10E Contactor mounting Main circuit: Screw Auxiliary circuit: Screw Manual-Automatic-Reset

RITTAL: CX PEDESTAL HWD 675x800x500mm **REPLACES 6705600**

RITTAL: 0100H0400W VX PLINTH F/R CORNER RAL9005 FRONT/REAR CORNERS WITH TRIM PANEL FOR 400W ENCLOSURE RAL9

RITTAL: CX DESK UNIT W 800mm **REPLACES 6711500 6715500 AND MORE**

RITTAL: 0200H0500D VX PLINTH SIDE RAL9005 SIDE TRIM PANELS FOR 500D ENCLOSURE RAL9005

RITTAL: AX COMMAND PANEL FOR TFT UP TO 24IN. WHD 650x450x155 mm

RITTAL: CP 60 ARM SECTION 250MM SOLID. RAL 7035

RITTAL: CP 60 WALL-BASE COUPLING LARGE NON-ROTATING, RAL 7035

RITTAL: VX PLINTH PANEL SIDES. 100H 600D RAL 9005

RITTAL: 2000H0600D CONNCTOR COVER F-TS RAL7035

TSLOTS: Hammer nut, M6, height 1.5 mm, yellow, slot 8, zinc plated steel

SIEMENS: Overload relay 6...25 A Electronic For motor protection Size S0, Class 10E Contactor mounting Main circuit: Screw Auxiliary circuit: Screw Manual-Automatic-Reset

SIEMENS: Overload relay 12.5...50 A Electronic For motor protection Size S2, Class 10E Contactor mounting Main circuit: Screw Auxiliary circuit: Screw Manual-Automatic-Reset

SIEMENS: Overload relay 32...115 A Electronic For motor protection Size S3, Class 10E Contactor mounting Main circuit: Screw Auxiliary circuit: Screw Manual-Automatic-Reset

Overload relay 1...4 A Electronic For motor protection Size S0, Class 5...30 Contactor mounting Main circuit: Screw Auxiliary circuit: Screw Manual-Automatic-Reset Internal ground fault detection

SIEMENS: Semiconductor relay, 1-phase 3RF2 Width 22.5 mm, 20 A 24-230 V / 24 V DC Spring-type terminal

RITTAL - WM wall-mounted enclosure single-door - Door: Carbon steel, all-round foamed-in PU seal Housing: Carbon steel - WM 16x16x06 NC

TSLOTS: Hammer nut, M8, height 3,0mm, blue, slot 10, zinc plated steel

Semiconductor relay, 1-phase 3RF2 Overall width 22.5 mm, 50 A 48-600 V / 4-30 V DC screw terminal Blocking voltage 1200 V

SIEMENS - Semiconductor relay, 1-phase 3RF2 Overall width 22.5 mm, 70 A 48-600 V / 24 V DC screw terminal

SIEMENS: SIMATIC S7, Micro Memory Card for S7-300/C7/ET 200, 3, 3V Nflash, 8 MB

SIEMENS: SINAMICS Power Module PM240-2 unfiltered with integrated braking chopper 380-480 V 3 AC +10/-10% 47-63 Hz Power high overload: 2.2kW at 200% 3s, 150% 57s, 100% 240 s; Ambient temperature -10 to +50 °C; power low overload: 3kW at 150% 3s, 110% 57s, 100% 240 s; Ambient temperature -10 to +40 °C 196x 73x 165 (HxWxD), FSA Degree of protection IP20 without Control Unit and operating unit Released as of CU firmware version V4.6

SIEMENS: SITOP PSU300E 24 V/5 A Stabilized power supply input: 3 AC 400-500 V output: 24 V DC/5 A

Solid-state contactor 3-phase 3RF3 AC 53 / 5.2 A / 40 ?C 48-480 V / 110-230 V AC 2-phase controlled Instantaneous switching screw terminal

Second lateral Auxiliary switch, 1 NO, 1 NC, screw terminal, for contactors 3RT1

SIEMENS - Contactor relay, 2 NO + 2 NC, 24 V AC, 50 / 60 Hz, Size S00, screw terminal

SIEMENS - Contactor relay, 2 NO + 2 NC, 120 V AC, 50 / 60 Hz Size S00, screw terminal

SIEMENS: Contactor relay, 2 NO + 2 NC, 110 V AC, 50 Hz, 120 V, 60 Hz, Size S00, screw terminal

SIEMENS: contactor relay, 2 NO + 2 NC, 24 V DC, screw terminal, frame size S00

SIEMENS - Contactor relay, 3 NO + 1 NC, 24 V DC, Size S00, screw terminal

SIEMENS - Contactor relay, 4 NO, 24 V AC, 50 / 60 Hz, Size S00, screw terminal

SIEMENS - Contactor relay, 4 NO, 120 V AC, 50 / 60 Hz, Size S00, screw terminal

SIEMENS: SIMATIC S7-1200, Communication module CM 1241, RS422/485, 9-pole D-sub (socket) supports Freeport

SIEMENS: Contactor relay, 4 NO, 24 V DC, Size S00, Spring-type terminal

SIEMENS - Auxiliary switch lateral, 1 NO + 1 NC Current path 1 NC, 1 NO for 3RH and 3RT screw terminal R: 21/22, 33/34 L: 41/42, 53/54

SIEMENS - Auxiliary switch lateral, 2 NO Current path 1 NO, 1 NO for 3RH and 3RT screw terminal R: 23/24, 33/34 L: 43/44, 53/54

SIEMENS - Auxiliary switch on the front, 2 NO + 2 NC Current path 1 NO, 1 NC, 1 NC, 1 NO for 3RH and 3RT screw terminal .3/.4, .1/.2, .1/.2, .3/.4

SIEMENS - Auxiliary switch on the front, 4 NO Current path 1 NO, 1 NO, 1 NO, 1 NO for 3RH and 3RT screw terminal .3/.4, .3/.4, .3/.4, .3/.4

SIEMENS: SIMATIC S7-1200 or Stand Alone, SIWAREX WP231, single-channel legal-for-trade weighing module for platform or hopper scales with analog load cells / strain gauges (full bridges), 4xDI, 4xDQ, 1xAQ, 1xRS485, 1xEthernet, 1xLC load cell interface (1-4mV/V)), attention: for legal-for-trade applications please follow the local laws applying in the country of verification! Detailed load cell diagnostics with digital junction box SIWAREX DB (7MH5001-0AD20 or 7MH5001-0AD01)

SIEMENS: SIEMENS LOW VOLTAGE 3VA UL MOLDED CASE CIRCUIT BREAKER WITH THERMAL - MAGNETIC TRIP UNIT. 3VA51 FRAME WITH MEDIUM (CLASS M) BREAKING CAPACITY. 60A 3-POLE (18KAIC AT 600Y/347) (35KAIC AT 480V). TM230 TRIP UNIT WITH FIXED Ir ADJUSTABLE Ii. SPECIAL FEATURES: WITHOUT LUGS NAVAL RATED 50C. DIMENSIONS (W x H x D) IN: 3 x 5.5 x 3.7.

SIEMENS: auxiliary switch, on the front, 3 NO + 1 NC, 53/54, 61/62, 73/74, 83/84, current path: 1 NO, 1 NC, 1 NO, 1 NO, screw terminal, physically coded, only with contactor relays 3RH2140 and 3RH2440 combinable (according to EN 50011)

SIEMENS: auxiliary switch, on the front, 1 NO + 2 NC, .1/.2, .1/.2, .3/.4, --/--, current path: 1 NC, 1 NC, 1 NO, --, screw terminal, for contactors 3RT2 and contactor relays 3RH2

SIEMENS - Auxiliary switch on the front, 2 NO + 1 NC Current path 1 NC, 1 NO, 1 NO for 3RH and 3RT screw terminal .1/.2, .3/.4, .3/.4

SIEMENS - Auxiliary switch on the front, 2 NO + 2 NC Current path 1 NC, 1 NC, 1 NO, 1 NO for 3RH and 3RT screw terminal .1/.2, .1/.2, .3/.4, .3/.4

SIEMENS: SIMATIC S7-1200, Analog input, SM 1231, 4 AI, +/-10 V, +/-5 V, +/-2.5 V, +/-1.25 or 0-20 mA/4-20 mA, 15 bit+sign bit